Turboclean Dairy RO Element Specification Sheets, using the ACM™ Reverse Osmosis Membranes, a fully aromatic, polyamide, thin film composite membranes. TriSep’s ACM™ series provides high quality permeate flow, high salt rejection, and constant low operating pressures while meeting USDA and FDA guidelines.

Applications

  • Whey concentration
  • Lactose and UF permeate concentration
  • Whole / Skim Milk Concentration
  • Evaporator Condensate recovery
  • Rinse water recovery
  • RO permeate polishing
  • Other food and pharmaceutical concentration
  • Food and pharmaceutical waste water

Membrane Characteristics and Operation Limitations

ACM2: High rejection, fully aromatic, polyamide thin film composite membrane on polyester backing

Operating Conditions and limitations

  • Maximum element feed pressure 600 psi (41 bar)
  • Typical element feed pressure 100 -400 psi (7-28 bar)
  • Maximum operating temperature 122º F (50ºC)
  • pH range continuous operation 2 – 11
  • pH range cleaning 2 – 11.5 @ 140ºF (60ºC)
  • Maximum chlorine concentration <0.1 ppm

Water Quality for cleaning and Diafiltration

  • Maximum SDI 5.0
  • Turbidity 1 NTU (15 minute test)

Other oxidizing agents and chemical limitations:

Consult the local TriSep representative

Application

Element

Element

Size

Code

Whey

31 Mill

3838/3840

M2D7U8

Whey

31 Mill

8038

M2D7U8

46 Mill

8038

M2D7V6

Milk

31 Mill

3838

M2D2U8

46 Mill

8038

M2D2V6

Lactose

31 Mill

3838

M2C9U8

46 Mill

3838

M2C9V6

Lactose

31 Mill

8038

M2C9U8


Home
Administration
Products
Technical Support
Whats New
Contact

 

TriSep Corporation

93 S La Patera Ln . Goleta Ca 93117 U.S.A
      Email:info@trisep.com Tel:(805)-964-8003 - Fax: (805)-964-1235
©2005, TriSep Corporation, all rights reserved. WebSite created by DHK Graphics™